Shopping for someone else but not sure what to give them? Give them the gift of choice with a Riding & Harness Stuff gift card.

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.

The Tri-Zone Horse All Sports Boots are the modern day breathable brushing boot. The perfect all round boot for all activities, including everyday schooling to cross country, jumping or hacking.

Protection provided by the All Sports Boots for horses.

The boot design uses a four layer system. The first layer is provides a inner lining for the horse and sits comfortably against the leg. It is perforated and cushioned.

Layer two is a strong mesh. This adds another layer of protection to the sports boots, but also stops any debris making its way into the boot towards your horses leg.

Layer three is the internal guard. This layer is placed over the vulnerable tendon area and is made with strips of material to allow it to mould around the horses leg. This allows the horse to move freely without the feeling of a ‘splint’.

Lastly, the outer layer provides a durable, breathable and attractive material. We’ve made sure this material is easy to clean and maintain too!

Testing of the Tri-Zone All Sports Horse Boots.

Designed to meet the needs of the everyday rider to the top international competitor, these boots are tested by an independent safety testing laboratory to check their ability to protect against concussion and penetration injuries. The boot testing also includes breathability, flexibility and weight testing too. In fact, these horse sports boots are so light they even float on water.

Need sports boots with maximum protection?

Choosing a boot for your horse usually comes with compromises. The more you add to a boot, the heavier and less breathable it becomes. However if a boot is too lightweight, you may find it isn’t protective enough. We’ve gone for a happy medium with the All Sports Boots. They are a step up from brushing boots – essentially breathable brushing boots with all round protection. While that protection is suitable for most, you might decide your horse needs more. If so, take a look at the Tri-Zone Impact Sports Boots.

Care:

30 degree wash

Wash with straps closed

Do not dry over direct heat

Do not tumble dry

An excellent fitting boot designed to encapsulate and support the tendon and fetlock joint.

The thick construction of this boot also ensures adequate protection against hard knocks

Set of 2

What are Sling Boots?

This type of boot is one of the most supportive and is designed to completely cover the lower leg, below the knee or hock joint, to below the fetlock. They are very effective at protecting the leg and give a great deal of support to tendons and ligaments. They are very good for horse's who have been injured or are prone to strain.

The Equilibrium Tri-Zone Fetlock boots are the ultimate in fetlock protection offring flexibility and lightness.

• Matches perfectly with the Tri-Zone Open Fronted Tendon Boot.
• Extremely lightweight for freedom of movement.
• Breathable.
• Three protective layers, offering good protection from both concussion and penetration injuries.
• Easy to wash and keep clean.
• One year product guarantee.

These fetlock boots comply with the standards set by the FEI and British Show jumping (2020). Flexible and non-restrictive. Simple non-elastic fastening, tough strike guard and a smooth cushioned inner lining for maximum comfort

Comprised of 3 protective layers, which aim to protect from concussion and penetration.

The first layer against the horses skin is smooth and soft EVA (Ethylene-Vinyl Acetate). This allows it to sit comfortably against the horses' leg and also complies with class rules.

The second layer is a tough and breathable, yet flexible EVA waffle. This allows it to be durable and protective, but also enables the horse to move without restriction.

Finally, the third layer provides strategic protection to the inside of the fetlock joint. Made from vinyl which is a strong, durable and moisture resistant material.

The hook cleaner brush is perfect for cleaning the fastenings of all Equilibrium boots. Machine washable at 30 degrees

Related Products

The Tri-Zone Horse All Sports Boots are the modern day breathable brushing boot. The perfect all round boot for all activities, including everyday schooling to cross country, jumping or hacking.

Protection provided by the All Sports Boots for horses.

The boot design uses a four layer system. The first layer is provides a inner lining for the horse and sits comfortably against the leg. It is perforated and cushioned.

Layer two is a strong mesh. This adds another layer of protection to the sports boots, but also stops any debris making its way into the boot towards your horses leg.

Layer three is the internal guard. This layer is placed over the vulnerable tendon area and is made with strips of material to allow it to mould around the horses leg. This allows the horse to move freely without the feeling of a ‘splint’.

Lastly, the outer layer provides a durable, breathable and attractive material. We’ve made sure this material is easy to clean and maintain too!

Testing of the Tri-Zone All Sports Horse Boots.

Designed to meet the needs of the everyday rider to the top international competitor, these boots are tested by an independent safety testing laboratory to check their ability to protect against concussion and penetration injuries. The boot testing also includes breathability, flexibility and weight testing too. In fact, these horse sports boots are so light they even float on water.

Need sports boots with maximum protection?

Choosing a boot for your horse usually comes with compromises. The more you add to a boot, the heavier and less breathable it becomes. However if a boot is too lightweight, you may find it isn’t protective enough. We’ve gone for a happy medium with the All Sports Boots. They are a step up from brushing boots – essentially breathable brushing boots with all round protection. While that protection is suitable for most, you might decide your horse needs more. If so, take a look at the Tri-Zone Impact Sports Boots.

Care:

30 degree wash

Wash with straps closed

Do not dry over direct heat

Do not tumble dry

The Equilibrium Tri-Zone Fetlock boots are the ultimate in fetlock protection offring flexibility and lightness.

• Matches perfectly with the Tri-Zone Open Fronted Tendon Boot.
• Extremely lightweight for freedom of movement.
• Breathable.
• Three protective layers, offering good protection from both concussion and penetration injuries.
• Easy to wash and keep clean.
• One year product guarantee.

These fetlock boots comply with the standards set by the FEI and British Show jumping (2020). Flexible and non-restrictive. Simple non-elastic fastening, tough strike guard and a smooth cushioned inner lining for maximum comfort

Comprised of 3 protective layers, which aim to protect from concussion and penetration.

The first layer against the horses skin is smooth and soft EVA (Ethylene-Vinyl Acetate). This allows it to sit comfortably against the horses' leg and also complies with class rules.

The second layer is a tough and breathable, yet flexible EVA waffle. This allows it to be durable and protective, but also enables the horse to move without restriction.

Finally, the third layer provides strategic protection to the inside of the fetlock joint. Made from vinyl which is a strong, durable and moisture resistant material.

The hook cleaner brush is perfect for cleaning the fastenings of all Equilibrium boots. Machine washable at 30 degrees

Related Products

A great value, super-stylish boot, perfect to use every day for hacking, schooling, lunging and turnout.

• Extremely lightweight; they don’t hold water!
• Independently tested for breathability and protection.
• Flexible.
• Breathable.

Made from high quality Spacer Fabric and EVA Waffle making them flexible, durable, comfortable to wear and breathable. The design ensures your horses’ legs are kept cool, whilst protecting your horses’ legs from brushing during ridden work or out in the field.

Fluorescent variation made using highly reflective tape that meets the standard EN 20471.

Can be worn on front or hind legs as required.

What is the inspiration behind the Tri-Zone Brushing Boots?

As preventing horses’ legs from overheating is such a ‘hot’ topic, we wanted to create a brushing boot that moved away from the traditional neoprene to something that is scientifically tested to fulfil its role protecting the leg from brushing related injuries, while remaining as breathable as possible. While the Tri-Zone All Sports Boots are very breathable, not every horse or activity warrants maximum or all round protection, so a durable and lightweight brushing boot was the solution.

What are the materials used in the Tri-Zone Brushing Boots?

Inner Layer: The spacer fabric on the inside of the boot creates a soft lining against your horses’ leg. Ideal to act as a ‘cushion’ and comfortable to wear, the spacer fabric is also fantastic at letting heat and moisture pass through easily to get sweat and warmth away from the skin. This fabric doesn’t hold water, to ensure they stay lightweight even when wet!

Outer Layer: EVA material is commonly found in the soles of human shoes and as padding on sports equipment - this material is durable, breathable, and protective. We’ve made sure it's easy to clean and maintain too. Tested in a laboratory to withstand a considerable amount of brushing action, the EVA is abrasion and scratch resistant, doesn’t hold any water and offers great impact protection.

Who are the Tri-Zone Brushing Boots for?

In short, the Tri-Zone Brushing Boots are for everyone. Due to the breathable and protective properties of the boot they can be for flatwork, hacking, can even splash through water without the boots becoming heavy as they do not with hold water, or turnout in all conditions.

The breathable material makes them perfect for all year round especially in hot weather, unlike traditional neoprene brushing boots, the Tri-Zone Brushing Boots provide good ventilation to keep your horses legs cool and are the most breathable boot within our range.

Due to their design and the sizes available, they fit a wide variety of horses too – from those with little bone to horses with feather. Their design also allows for free movement of the fetlock – a high motion joint that plays a fundamental part in how your horse moves.

How do I care for the Tri-Zone Brushing Boots?

The boots can be washed off with a rinse from the hose or if needing a slightly more thorough wash, they are machine washable at 30 degrees Celsius.  Leave them to air dry away from a direct heat source and they will be dry and ready to use in no time!

How do I fit the Brushing Boots?

1. Take measurements. Most boot brands will offer boots in sizes ‘small’, ‘medium’ and ‘large’ or ‘pony’, ‘cob’ and ‘full’, but these can be rather abstract terms (as many of us will have experienced when trying to shop for clothes – one shop’s ‘small’ is another’s ‘extra-large’!), so having an idea of your horse or pony’s actual measurements can help. We’d recommend measuring both front and hind legs, as it is very common for horses to take different sizes for both. See our size guide for measurements for these boots.
2. When putting the boots on, with the longer part on the inside of your horses’ leg covering the inside of the fetlock joint, slide the boot down the cannon bone until you should feel the boot ‘fit’ into place as the front of the boot comes down to meet the top of the fetlock joint.
3. Correct ‘tension’. One finger should fit snugly between the top of the boot and the horse's leg. If the boot is too tight it could rub the horse's skin, or cause damage to the tendons. If the boot is too loose it could move around or down the leg

Why use Brushing Boots?

Brushing Boots are a popular choice of boot to protect the horse’s lower leg during exercise from ‘brushing’ injuries. These are injuries that may occur if one leg, or hoof, strikes the opposite leg. Brushing boots can also provide protection from minor scrapes and injuries during schooling, hacking, or turnout. This modern brushing boot is also lightweight, durable and the most cost-effective boot for everyday use.

A great value, super-stylish boot, perfect to use every day for hacking, schooling, lunging and turnout.

• Extremely lightweight; they don’t hold water!
• Independently tested for breathability and protection.
• Flexible.
• Breathable.

Made from high quality Spacer Fabric and EVA Waffle making them flexible, durable, comfortable to wear and breathable. The design ensures your horses’ legs are kept cool, whilst protecting your horses’ legs from brushing during ridden work or out in the field.

Fluorescent variation made using highly reflective tape that meets the standard EN 20471.

Can be worn on front or hind legs as required.

What is the inspiration behind the Tri-Zone Brushing Boots?

As preventing horses’ legs from overheating is such a ‘hot’ topic, we wanted to create a brushing boot that moved away from the traditional neoprene to something that is scientifically tested to fulfil its role protecting the leg from brushing related injuries, while remaining as breathable as possible. While the Tri-Zone All Sports Boots are very breathable, not every horse or activity warrants maximum or all round protection, so a durable and lightweight brushing boot was the solution.

What are the materials used in the Tri-Zone Brushing Boots?

Inner Layer: The spacer fabric on the inside of the boot creates a soft lining against your horses’ leg. Ideal to act as a ‘cushion’ and comfortable to wear, the spacer fabric is also fantastic at letting heat and moisture pass through easily to get sweat and warmth away from the skin. This fabric doesn’t hold water, to ensure they stay lightweight even when wet!

Outer Layer: EVA material is commonly found in the soles of human shoes and as padding on sports equipment - this material is durable, breathable, and protective. We’ve made sure it's easy to clean and maintain too. Tested in a laboratory to withstand a considerable amount of brushing action, the EVA is abrasion and scratch resistant, doesn’t hold any water and offers great impact protection.

Who are the Tri-Zone Brushing Boots for?

In short, the Tri-Zone Brushing Boots are for everyone. Due to the breathable and protective properties of the boot they can be for flatwork, hacking, can even splash through water without the boots becoming heavy as they do not with hold water, or turnout in all conditions.

The breathable material makes them perfect for all year round especially in hot weather, unlike traditional neoprene brushing boots, the Tri-Zone Brushing Boots provide good ventilation to keep your horses legs cool and are the most breathable boot within our range.

Due to their design and the sizes available, they fit a wide variety of horses too – from those with little bone to horses with feather. Their design also allows for free movement of the fetlock – a high motion joint that plays a fundamental part in how your horse moves.

How do I care for the Tri-Zone Brushing Boots?

The boots can be washed off with a rinse from the hose or if needing a slightly more thorough wash, they are machine washable at 30 degrees Celsius.  Leave them to air dry away from a direct heat source and they will be dry and ready to use in no time!

How do I fit the Brushing Boots?

1. Take measurements. Most boot brands will offer boots in sizes ‘small’, ‘medium’ and ‘large’ or ‘pony’, ‘cob’ and ‘full’, but these can be rather abstract terms (as many of us will have experienced when trying to shop for clothes – one shop’s ‘small’ is another’s ‘extra-large’!), so having an idea of your horse or pony’s actual measurements can help. We’d recommend measuring both front and hind legs, as it is very common for horses to take different sizes for both. See our size guide for measurements for these boots.
2. When putting the boots on, with the longer part on the inside of your horses’ leg covering the inside of the fetlock joint, slide the boot down the cannon bone until you should feel the boot ‘fit’ into place as the front of the boot comes down to meet the top of the fetlock joint.
3. Correct ‘tension’. One finger should fit snugly between the top of the boot and the horse's leg. If the boot is too tight it could rub the horse's skin, or cause damage to the tendons. If the boot is too loose it could move around or down the leg

Why use Brushing Boots?

Brushing Boots are a popular choice of boot to protect the horse’s lower leg during exercise from ‘brushing’ injuries. These are injuries that may occur if one leg, or hoof, strikes the opposite leg. Brushing boots can also provide protection from minor scrapes and injuries during schooling, hacking, or turnout. This modern brushing boot is also lightweight, durable and the most cost-effective boot for everyday use.

A great value, super-stylish boot, perfect to use every day for hacking, schooling, lunging and turnout.

• Extremely lightweight; they don’t hold water!
• Independently tested for breathability and protection.
• Flexible.
• Breathable.

Made from high quality Spacer Fabric and EVA Waffle making them flexible, durable, comfortable to wear and breathable. The design ensures your horses’ legs are kept cool, whilst protecting your horses’ legs from brushing during ridden work or out in the field.

Fluorescent variation made using highly reflective tape that meets the standard EN 20471.

Can be worn on front or hind legs as required.

What is the inspiration behind the Tri-Zone Brushing Boots?

As preventing horses’ legs from overheating is such a ‘hot’ topic, we wanted to create a brushing boot that moved away from the traditional neoprene to something that is scientifically tested to fulfil its role protecting the leg from brushing related injuries, while remaining as breathable as possible. While the Tri-Zone All Sports Boots are very breathable, not every horse or activity warrants maximum or all round protection, so a durable and lightweight brushing boot was the solution.

What are the materials used in the Tri-Zone Brushing Boots?

Inner Layer: The spacer fabric on the inside of the boot creates a soft lining against your horses’ leg. Ideal to act as a ‘cushion’ and comfortable to wear, the spacer fabric is also fantastic at letting heat and moisture pass through easily to get sweat and warmth away from the skin. This fabric doesn’t hold water, to ensure they stay lightweight even when wet!

Outer Layer: EVA material is commonly found in the soles of human shoes and as padding on sports equipment - this material is durable, breathable, and protective. We’ve made sure it's easy to clean and maintain too. Tested in a laboratory to withstand a considerable amount of brushing action, the EVA is abrasion and scratch resistant, doesn’t hold any water and offers great impact protection.

Who are the Tri-Zone Brushing Boots for?

In short, the Tri-Zone Brushing Boots are for everyone. Due to the breathable and protective properties of the boot they can be for flatwork, hacking, can even splash through water without the boots becoming heavy as they do not with hold water, or turnout in all conditions.

The breathable material makes them perfect for all year round especially in hot weather, unlike traditional neoprene brushing boots, the Tri-Zone Brushing Boots provide good ventilation to keep your horses legs cool and are the most breathable boot within our range.

Due to their design and the sizes available, they fit a wide variety of horses too – from those with little bone to horses with feather. Their design also allows for free movement of the fetlock – a high motion joint that plays a fundamental part in how your horse moves.

How do I care for the Tri-Zone Brushing Boots?

The boots can be washed off with a rinse from the hose or if needing a slightly more thorough wash, they are machine washable at 30 degrees Celsius.  Leave them to air dry away from a direct heat source and they will be dry and ready to use in no time!

How do I fit the Brushing Boots?

1. Take measurements. Most boot brands will offer boots in sizes ‘small’, ‘medium’ and ‘large’ or ‘pony’, ‘cob’ and ‘full’, but these can be rather abstract terms (as many of us will have experienced when trying to shop for clothes – one shop’s ‘small’ is another’s ‘extra-large’!), so having an idea of your horse or pony’s actual measurements can help. We’d recommend measuring both front and hind legs, as it is very common for horses to take different sizes for both. See our size guide for measurements for these boots.
2. When putting the boots on, with the longer part on the inside of your horses’ leg covering the inside of the fetlock joint, slide the boot down the cannon bone until you should feel the boot ‘fit’ into place as the front of the boot comes down to meet the top of the fetlock joint.
3. Correct ‘tension’. One finger should fit snugly between the top of the boot and the horse's leg. If the boot is too tight it could rub the horse's skin, or cause damage to the tendons. If the boot is too loose it could move around or down the leg

Why use Brushing Boots?

Brushing Boots are a popular choice of boot to protect the horse’s lower leg during exercise from ‘brushing’ injuries. These are injuries that may occur if one leg, or hoof, strikes the opposite leg. Brushing boots can also provide protection from minor scrapes and injuries during schooling, hacking, or turnout. This modern brushing boot is also lightweight, durable and the most cost-effective boot for everyday use.

A great value, super-stylish boot, perfect to use every day for hacking, schooling, lunging and turnout.

• Extremely lightweight; they don’t hold water!
• Independently tested for breathability and protection.
• Flexible.
• Breathable.

Made from high quality Spacer Fabric and EVA Waffle making them flexible, durable, comfortable to wear and breathable. The design ensures your horses’ legs are kept cool, whilst protecting your horses’ legs from brushing during ridden work or out in the field.

Fluorescent variation made using highly reflective tape that meets the standard EN 20471.

Can be worn on front or hind legs as required.

What is the inspiration behind the Tri-Zone Brushing Boots?

As preventing horses’ legs from overheating is such a ‘hot’ topic, we wanted to create a brushing boot that moved away from the traditional neoprene to something that is scientifically tested to fulfil its role protecting the leg from brushing related injuries, while remaining as breathable as possible. While the Tri-Zone All Sports Boots are very breathable, not every horse or activity warrants maximum or all round protection, so a durable and lightweight brushing boot was the solution.

What are the materials used in the Tri-Zone Brushing Boots?

Inner Layer: The spacer fabric on the inside of the boot creates a soft lining against your horses’ leg. Ideal to act as a ‘cushion’ and comfortable to wear, the spacer fabric is also fantastic at letting heat and moisture pass through easily to get sweat and warmth away from the skin. This fabric doesn’t hold water, to ensure they stay lightweight even when wet!

Outer Layer: EVA material is commonly found in the soles of human shoes and as padding on sports equipment - this material is durable, breathable, and protective. We’ve made sure it's easy to clean and maintain too. Tested in a laboratory to withstand a considerable amount of brushing action, the EVA is abrasion and scratch resistant, doesn’t hold any water and offers great impact protection.

Who are the Tri-Zone Brushing Boots for?

In short, the Tri-Zone Brushing Boots are for everyone. Due to the breathable and protective properties of the boot they can be for flatwork, hacking, can even splash through water without the boots becoming heavy as they do not with hold water, or turnout in all conditions.

The breathable material makes them perfect for all year round especially in hot weather, unlike traditional neoprene brushing boots, the Tri-Zone Brushing Boots provide good ventilation to keep your horses legs cool and are the most breathable boot within our range.

Due to their design and the sizes available, they fit a wide variety of horses too – from those with little bone to horses with feather. Their design also allows for free movement of the fetlock – a high motion joint that plays a fundamental part in how your horse moves.

How do I care for the Tri-Zone Brushing Boots?

The boots can be washed off with a rinse from the hose or if needing a slightly more thorough wash, they are machine washable at 30 degrees Celsius.  Leave them to air dry away from a direct heat source and they will be dry and ready to use in no time!

How do I fit the Brushing Boots?

1. Take measurements. Most boot brands will offer boots in sizes ‘small’, ‘medium’ and ‘large’ or ‘pony’, ‘cob’ and ‘full’, but these can be rather abstract terms (as many of us will have experienced when trying to shop for clothes – one shop’s ‘small’ is another’s ‘extra-large’!), so having an idea of your horse or pony’s actual measurements can help. We’d recommend measuring both front and hind legs, as it is very common for horses to take different sizes for both. See our size guide for measurements for these boots.
2. When putting the boots on, with the longer part on the inside of your horses’ leg covering the inside of the fetlock joint, slide the boot down the cannon bone until you should feel the boot ‘fit’ into place as the front of the boot comes down to meet the top of the fetlock joint.
3. Correct ‘tension’. One finger should fit snugly between the top of the boot and the horse's leg. If the boot is too tight it could rub the horse's skin, or cause damage to the tendons. If the boot is too loose it could move around or down the leg

Why use Brushing Boots?

Brushing Boots are a popular choice of boot to protect the horse’s lower leg during exercise from ‘brushing’ injuries. These are injuries that may occur if one leg, or hoof, strikes the opposite leg. Brushing boots can also provide protection from minor scrapes and injuries during schooling, hacking, or turnout. This modern brushing boot is also lightweight, durable and the most cost-effective boot for everyday use.

Made from a matte effect PU shell with a shock absorbing neoprene lining. Features double fold, branded touch tape fastening and two velcro straps.

The Tri-Zone Horse All Sports Boots are the modern day breathable brushing boot. The perfect all round boot for all activities, including everyday schooling to cross country, jumping or hacking.

Protection provided by the All Sports Boots for horses.

The boot design uses a four layer system. The first layer is provides a inner lining for the horse and sits comfortably against the leg. It is perforated and cushioned.

Layer two is a strong mesh. This adds another layer of protection to the sports boots, but also stops any debris making its way into the boot towards your horses leg.

Layer three is the internal guard. This layer is placed over the vulnerable tendon area and is made with strips of material to allow it to mould around the horses leg. This allows the horse to move freely without the feeling of a ‘splint’.

Lastly, the outer layer provides a durable, breathable and attractive material. We’ve made sure this material is easy to clean and maintain too!

Testing of the Tri-Zone All Sports Horse Boots.

Designed to meet the needs of the everyday rider to the top international competitor, these boots are tested by an independent safety testing laboratory to check their ability to protect against concussion and penetration injuries. The boot testing also includes breathability, flexibility and weight testing too. In fact, these horse sports boots are so light they even float on water.

Need sports boots with maximum protection?

Choosing a boot for your horse usually comes with compromises. The more you add to a boot, the heavier and less breathable it becomes. However if a boot is too lightweight, you may find it isn’t protective enough. We’ve gone for a happy medium with the All Sports Boots. They are a step up from brushing boots – essentially breathable brushing boots with all round protection. While that protection is suitable for most, you might decide your horse needs more. If so, take a look at the Tri-Zone Impact Sports Boots.

Care:

30 degree wash

Wash with straps closed

Do not dry over direct heat

Do not tumble dry

The Tri-Zone Horse All Sports Boots are the modern day breathable brushing boot. The perfect all round boot for all activities, including everyday schooling to cross country, jumping or hacking.

Protection provided by the All Sports Boots for horses.

The boot design uses a four layer system. The first layer is provides a inner lining for the horse and sits comfortably against the leg. It is perforated and cushioned.

Layer two is a strong mesh. This adds another layer of protection to the sports boots, but also stops any debris making its way into the boot towards your horses leg.

Layer three is the internal guard. This layer is placed over the vulnerable tendon area and is made with strips of material to allow it to mould around the horses leg. This allows the horse to move freely without the feeling of a ‘splint’.

Lastly, the outer layer provides a durable, breathable and attractive material. We’ve made sure this material is easy to clean and maintain too!

Testing of the Tri-Zone All Sports Horse Boots.

Designed to meet the needs of the everyday rider to the top international competitor, these boots are tested by an independent safety testing laboratory to check their ability to protect against concussion and penetration injuries. The boot testing also includes breathability, flexibility and weight testing too. In fact, these horse sports boots are so light they even float on water.

Need sports boots with maximum protection?

Choosing a boot for your horse usually comes with compromises. The more you add to a boot, the heavier and less breathable it becomes. However if a boot is too lightweight, you may find it isn’t protective enough. We’ve gone for a happy medium with the All Sports Boots. They are a step up from brushing boots – essentially breathable brushing boots with all round protection. While that protection is suitable for most, you might decide your horse needs more. If so, take a look at the Tri-Zone Impact Sports Boots.

Care:

30 degree wash

Wash with straps closed

Do not dry over direct heat

Do not tumble dry

The Tri-Zone Horse All Sports Boots are the modern day breathable brushing boot. The perfect all round boot for all activities, including everyday schooling to cross country, jumping or hacking.

Protection provided by the All Sports Boots for horses.

The boot design uses a four layer system. The first layer is provides a inner lining for the horse and sits comfortably against the leg. It is perforated and cushioned.

Layer two is a strong mesh. This adds another layer of protection to the sports boots, but also stops any debris making its way into the boot towards your horses leg.

Layer three is the internal guard. This layer is placed over the vulnerable tendon area and is made with strips of material to allow it to mould around the horses leg. This allows the horse to move freely without the feeling of a ‘splint’.

Lastly, the outer layer provides a durable, breathable and attractive material. We’ve made sure this material is easy to clean and maintain too!

Testing of the Tri-Zone All Sports Horse Boots.

Designed to meet the needs of the everyday rider to the top international competitor, these boots are tested by an independent safety testing laboratory to check their ability to protect against concussion and penetration injuries. The boot testing also includes breathability, flexibility and weight testing too. In fact, these horse sports boots are so light they even float on water.

Need sports boots with maximum protection?

Choosing a boot for your horse usually comes with compromises. The more you add to a boot, the heavier and less breathable it becomes. However if a boot is too lightweight, you may find it isn’t protective enough. We’ve gone for a happy medium with the All Sports Boots. They are a step up from brushing boots – essentially breathable brushing boots with all round protection. While that protection is suitable for most, you might decide your horse needs more. If so, take a look at the Tri-Zone Impact Sports Boots.

Care:

30 degree wash

Wash with straps closed

Do not dry over direct heat

Do not tumble dry

Developed to provide an extremely hardwearing boot that offers safe protection from over reach injuries. The carefully designed shape of this innovative boot minimizes the risk of an accident resulting from the horse treading on the boot. Shaped for the perfect fit with a super tough strike guard to protect the heel area and an anti-spin heel button. Waterproof and rotproof. Easy to wash, easy to wear.

• Carefully designed with an anti-spin heel button
• Great protection for high impact sports or during turnout
• Tough PU Kevlar type strike guard heel strike pad
• Hardwearing, waterproof and rot-proof

Size Guide

A great value, super-stylish boot, perfect to use every day for hacking, schooling, lunging and turnout.

• Extremely lightweight; they don’t hold water!
• Independently tested for breathability and protection.
• Flexible.
• Breathable.

Made from high quality Spacer Fabric and EVA Waffle making them flexible, durable, comfortable to wear and breathable. The design ensures your horses’ legs are kept cool, whilst protecting your horses’ legs from brushing during ridden work or out in the field.

Fluorescent variation made using highly reflective tape that meets the standard EN 20471.

Can be worn on front or hind legs as required.

What is the inspiration behind the Tri-Zone Brushing Boots?

As preventing horses’ legs from overheating is such a ‘hot’ topic, we wanted to create a brushing boot that moved away from the traditional neoprene to something that is scientifically tested to fulfil its role protecting the leg from brushing related injuries, while remaining as breathable as possible. While the Tri-Zone All Sports Boots are very breathable, not every horse or activity warrants maximum or all round protection, so a durable and lightweight brushing boot was the solution.

What are the materials used in the Tri-Zone Brushing Boots?

Inner Layer: The spacer fabric on the inside of the boot creates a soft lining against your horses’ leg. Ideal to act as a ‘cushion’ and comfortable to wear, the spacer fabric is also fantastic at letting heat and moisture pass through easily to get sweat and warmth away from the skin. This fabric doesn’t hold water, to ensure they stay lightweight even when wet!

Outer Layer: EVA material is commonly found in the soles of human shoes and as padding on sports equipment - this material is durable, breathable, and protective. We’ve made sure it's easy to clean and maintain too. Tested in a laboratory to withstand a considerable amount of brushing action, the EVA is abrasion and scratch resistant, doesn’t hold any water and offers great impact protection.

Who are the Tri-Zone Brushing Boots for?

In short, the Tri-Zone Brushing Boots are for everyone. Due to the breathable and protective properties of the boot they can be for flatwork, hacking, can even splash through water without the boots becoming heavy as they do not with hold water, or turnout in all conditions.

The breathable material makes them perfect for all year round especially in hot weather, unlike traditional neoprene brushing boots, the Tri-Zone Brushing Boots provide good ventilation to keep your horses legs cool and are the most breathable boot within our range.

Due to their design and the sizes available, they fit a wide variety of horses too – from those with little bone to horses with feather. Their design also allows for free movement of the fetlock – a high motion joint that plays a fundamental part in how your horse moves.

How do I care for the Tri-Zone Brushing Boots?

The boots can be washed off with a rinse from the hose or if needing a slightly more thorough wash, they are machine washable at 30 degrees Celsius.  Leave them to air dry away from a direct heat source and they will be dry and ready to use in no time!

How do I fit the Brushing Boots?

1. Take measurements. Most boot brands will offer boots in sizes ‘small’, ‘medium’ and ‘large’ or ‘pony’, ‘cob’ and ‘full’, but these can be rather abstract terms (as many of us will have experienced when trying to shop for clothes – one shop’s ‘small’ is another’s ‘extra-large’!), so having an idea of your horse or pony’s actual measurements can help. We’d recommend measuring both front and hind legs, as it is very common for horses to take different sizes for both. See our size guide for measurements for these boots.
2. When putting the boots on, with the longer part on the inside of your horses’ leg covering the inside of the fetlock joint, slide the boot down the cannon bone until you should feel the boot ‘fit’ into place as the front of the boot comes down to meet the top of the fetlock joint.
3. Correct ‘tension’. One finger should fit snugly between the top of the boot and the horse's leg. If the boot is too tight it could rub the horse's skin, or cause damage to the tendons. If the boot is too loose it could move around or down the leg

Why use Brushing Boots?

Brushing Boots are a popular choice of boot to protect the horse’s lower leg during exercise from ‘brushing’ injuries. These are injuries that may occur if one leg, or hoof, strikes the opposite leg. Brushing boots can also provide protection from minor scrapes and injuries during schooling, hacking, or turnout. This modern brushing boot is also lightweight, durable and the most cost-effective boot for everyday use.

Developed through working with one of our sponsored riders - Sam Lyle and after many months of field testing, we believe all models in the Zilco Performance Boot range offer the best shape, fit and protection available to stand up to the fast paced, extreme conditions experienced in cross-country riding.

Although designed for the cross country course, all models are suited to a range of performance sports.

All models in this range feature:-

• Tough 1680 Denier polyester outer
• Wear pads designed to reduce weight yet provide protection to the legs
• Breathable, quick dry lining that will not retain water or sweat and allow ample airflow
• Wide reinforced touch tape straps for a secure fit
• Easy maintenance - simply hand wash in cold water

This model offers ample protection in the front, yet maintains enough feel for the horse to be aware of any obstacles. These boots also feature reflective, high visibility ribbon for safety in low light conditions and shatterproof protection plates on the shin for optimum protecton.

Black - Set of 2